Internet

What is HFC? NBN hybrid fibre coaxial explained

HFC is the NBN connection type that reuses the coaxial cable built for pay TV in the 1990s. Here's how an HFC connection works, what equipment you get, and how it stacks up against full fibre.

UCBy Utility Club 7 min read
On this page
  1. Quick facts
  2. What does HFC mean?
  3. How does HFC work?
  4. What equipment comes with an HFC connection?
  5. What speeds can you get on HFC?
  6. HFC vs FTTP: is HFC as good as fibre?
  7. Can you upgrade from HFC to FTTP?
  8. How to check if you have an HFC connection
  9. What happens during an HFC installation?
  10. Does HFC work in a blackout?

HFC is one of the NBN connection types that can handle the fastest home internet plans available in Australia.

If your address uses HFC, your connection runs on the same coaxial cable network that was originally built to deliver pay TV, which nbn took over and upgraded for broadband.

This guide explains what HFC means, how it works, what equipment you'll find in your home and what speeds you can get.

Quick facts

  • HFC stands for hybrid fibre coaxial. Fibre optic cable runs to a node in your area, and coaxial cable from the old pay TV network covers the final stretch to your home.
  • About 2.5 million HFC premises can now achieve wholesale download speeds of up to 2 Gbps, according to nbn's August 2026 results statement.
  • HFC homes can order the same top speed tiers as full fibre homes, although the fastest tier has a lower upload speed on HFC.
  • The nbn connection box needs mains power, so your HFC internet won't work during a blackout.

What does HFC mean?

HFC means hybrid fibre coaxial. The "hybrid" part refers to the two types of cable the connection uses. Fibre optic cable carries data most of the way, and coaxial cable (the thick, round cable once used to plug in a pay TV set top box) carries it the rest of the way to your home.

You might also see HFC called "cable" or "cable internet". Before the NBN, Telstra and Optus each built their own HFC cable networks in the 1990s, and those networks were taken over and upgraded to carry NBN services. That history is why HFC is mostly found in capital cities, where the original cable networks were built.

HFC is one of seven NBN connection types. Our guide to NBN connection types explains how they all compare.

How does HFC work?

With HFC, nbn runs a line from the nearest available fibre node to your premises, using the existing pay TV or cable network for the final part of the connection. HFC is a fixed line connection, which means a physical cable runs all the way into your home.

The fibre section carries data as pulses of light. At the node, the signal is converted so it can travel over the copper core of the coaxial cable to a wall outlet inside your home. An nbn connection box then translates that signal into a standard internet connection that your router can use.

Coaxial cable can carry far more data than the twisted pair copper phone lines used by FTTN and FTTC connections, which is why HFC supports much faster plans than those copper based types.

One feature of HFC that affects performance is that homes in the same area share the capacity of the local cable segment. nbn's speed tier announcement notes that the fastest plans are subject to the capacity within each individual HFC segment, which can affect whether a provider can place an order for you. With FTTP, capacity is managed at the fibre port level instead.

What equipment comes with an HFC connection?

An HFC connection has two main parts inside your home:

  • Cable wall outlet: This is where the coaxial cable from the street enters your home. If you had pay TV through cable in the past, it may be the same outlet.
  • nbn connection box: This box connects to the wall outlet with a fixed white cable, and your Wi-Fi router plugs into it with an Ethernet cable. It's also called the Network Termination Device (NTD).

According to nbn's guide to the HFC connection box, the box has four lights on the front labelled Power, Downstream, Upstream and Online. All four should turn solid green once the connection is working. nbn says new HFC connections have been supplied with a newer box since February 2025, which includes a 2.5 Gigabit Ethernet port for multi-gigabit plans.

The connection box is nbn property, and it's only configured for the address where it was installed. If you move house, leave it behind. If you're moving into a home with HFC and the box is missing, your provider can arrange a new one.

You supply your own router (or use one from your provider), plus the Ethernet cable that connects it to the connection box.

What speeds can you get on HFC?

HFC homes can order plans from every residential speed tier, including the multi-gigabit Home Hyperfast tier that launched in September 2025. The table below shows the wholesale speeds for nbn's highest residential tiers on HFC, from nbn's speed tier announcement.

nbn speed tier Wholesale download speed Wholesale upload speed on HFC Wholesale upload speed on FTTP
Home Fast 500 Mbps 50 Mbps 50 Mbps
Home Superfast 750 Mbps 50 Mbps 50 Mbps
Home Ultrafast About 1,000 Mbps 100 Mbps 100 Mbps
Home Hyperfast 2,000 Mbps 100 Mbps 200 Mbps

These are the maximum wholesale speeds nbn delivers to providers. The speed you get depends on your provider, your plan, your home Wi-Fi and how busy the network is.

Providers publish typical evening speeds for each plan, which give a better idea of real world performance than the maximum figures.

To get the most from a Home Hyperfast plan, you need a newer connection box. nbn says 2 Gbps plans require the latest connection box, and your provider can tell you whether your equipment needs upgrading. Your router also needs a WAN port faster than 1 Gbps, otherwise it will cap your speed at around 1 Gbps.

HFC vs FTTP: is HFC as good as fibre?

For most households, HFC delivers speeds that are close to FTTP. Both connection types can access every nbn residential speed tier, and the download speeds are the same on each tier. The main differences are:

  • Upload speed on Home Hyperfast: FTTP gets up to 200 Mbps upload on the 2 Gbps tier, while HFC gets up to 100 Mbps.
  • Shared capacity: HFC capacity is shared across a cable segment, so speeds can be more affected by busy periods in your street.
  • Future upgrades: Fibre can be upgraded to higher speeds by changing the equipment at each end. HFC relies on upgrades to the cable network itself.

nbn is still investing in the HFC network. In a field trial, nbn tested new HFC network equipment with DOCSIS 4.0 cable modems, and said the technology could unlock wholesale capacities approaching 10 Gbps, similar to its fibre network.

Our guide to what FTTP is explains full fibre connections in more detail.

Can you upgrade from HFC to FTTP?

Not through nbn's main fibre upgrade program. nbn's FTTP upgrade program is open to selected homes on FTTN and FTTC, which are the slower copper based connection types. HFC already supports the highest speed tiers, so it isn't part of that program.

If you're on HFC and want the fastest plan available, order a Home Hyperfast plan and ask your provider whether you need a new connection box. 

How to check if you have an HFC connection

The quickest way is to enter your address on the nbn website, which shows the connection type available at your home.

You can also check the equipment in your home. An HFC home has a coaxial cable wall outlet and an nbn connection box with four lights on the front (Power, Downstream, Upstream and Online), connected to the outlet by a white cable.

Your provider can also tell you your connection type, and it usually appears on your plan's Critical Information Summary or in your account.

What happens during an HFC installation?

Depending on your premises, an HFC connection is either installed by an nbn approved technician or set up by you with a self-install kit. Your provider will confirm which option applies when you order.

nbn's HFC installation guide says a standard technician visit takes two to four hours, while complex installations can take up to eight hours. Someone over 18 needs to be home for the whole appointment. nbn also recommends placing the connection box within 80 cm of a power point, in a cool, dry and ventilated spot, and in the same building as your main electricity meter or switchboard.

Once everything is connected and switched on, allow up to 30 minutes for all four lights on the connection box to turn solid green. If they don't, check that every cable is firmly connected, then turn the box off and on again. Renters should let their landlord or property manager know before installation day.

Does HFC work in a blackout?

The nbn connection box needs mains power, and so does your router. If the power goes out, your internet and any home phone service that runs over your nbn connection will stop working until power returns.

nbn suggests keeping a charged mobile phone handy during installation, as some existing services such as medical alarms may be interrupted. 

If you rely on a medical alarm or another device that needs a working connection, ask your provider about backup options before you connect.

See if you can save

Enter your address and compare plans from Australia's leading retailers.

Compare now

Frequently asked questions

What is HFC on the NBN?
HFC stands for hybrid fibre coaxial. It's an NBN connection type that uses fibre optic cable to a node in your area and the existing pay TV coaxial cable network for the final connection to your home.
Is HFC good for internet?
HFC is good for internet because it supports every nbn residential speed tier, including Home Hyperfast with wholesale download speeds of up to 2,000 Mbps. It’s much faster than the copper based FTTN and FTTC connection types, although upload speeds on the top tier are lower than on FTTP.
Is HFC the same as cable internet?
HFC is the same as cable internet, as it’s the technology cable internet has always used in Australia. The NBN’s HFC network was built from the cable networks Telstra and Optus constructed in the 1990s for pay TV and broadband.
Is HFC faster than FTTN?
HFC is much faster than FTTN. HFC can access plans with wholesale download speeds up to 2,000 Mbps, while FTTN uses the copper phone line for the final stretch, which limits speeds and means FTTN homes can’t order the fastest tiers without upgrading to FTTP.
Do I need a special modem for HFC?
You don’t need a special modem for HFC, but you do need a router with an Ethernet WAN port that plugs into the nbn connection box. Most routers sold for NBN connections can do this. For a 2 Gbps plan, choose a router with a WAN port faster than 1 Gbps, such as a 2.5 Gbps port.
Can I move my HFC connection box?
You can’t move your HFC connection box yourself. nbn says the connection box shouldn’t be moved without nbn’s permission and a technician present, so talk to your provider if the box needs to be in a different spot.
Can I still get pay TV over HFC?
You can’t get pay TV through a new HFC installation, because nbn no longer supplies a pay TV installation option, so splitters and extra cabling aren’t part of the setup. Check with your pay TV provider about streaming or internet based options.
Share
UC
Utility Club

The Utility Club team helps Australian households compare and switch electricity, gas, internet and health insurance.

Paying too much for your utilities?

Compare electricity, gas and internet plans in minutes — free, no obligation.